RSJ beams (Rolled Steel Joists) are one of the most common solutions for supporting loads when you remove a load-bearing wall, create open-plan spaces, or extend a property. This guide explains what an RSJ is, how it’s made, typical uses and sizes, when you’ll need...
A lintel beam is the horizontal support that spans doors, windows, and other openings, transferring the load safely to the walls either side. This article explains what lintels do, the main types (including why steel is often preferred), when a lintel is required under UK...
Steel fabrication leaves little room for error and the most expensive problems usually start with simple oversights. This post breaks down five common mistakes (from poor communication and wrong material selection to welding issues, measurement inaccuracies, and weak quality control) and shows how to avoid...
Nesting is one of the simplest ways to cut waste in sheet metal fabrication. This article explains how nesting software optimises part layouts to improve material yield, speed up CNC cutting, reduce errors, and lower production costs....
Planning a steel structure in the UK? This guide breaks down planning permission vs building regulations, explains permitted development and its limits, and outlines what Building Control expects for structural safety, fire protection and energy efficiency....
Need welding done on-site? This guide explains how mobile welding works, what jobs it suits (repairs, modifications and structural steelwork), and why using qualified, well-equipped welders can reduce downtime and keep your project on schedule. ...
Cut costs and reduce waste in steel fabrication with 10 practical strategies: smarter material choices, optimised cutting and nesting, better planning, maintenance, QC, and recycling....
